***THIS IS A PRE-ORDER; LEAD TIMES MAY APPLY.***

Designed for use on the factory Beretta 92 and M9A3 threaded barrels. This two port compensator is based off of the original Jarvis compensator for the Beretta 92 and M9. Threaded in 1/2-28, this compensator attaches directly to the Beretta factory 1/2-28 threaded barrel for the 92 and M9A3 series pistols. With an expanded first port, the compensator effectively reduces muzzle rise and felt recoil.

Gunsmith Fit (Includes Set Screw Flat): No

You will need to machine a screw flat for the set screw. Gunsmithing may be required as well as compensator fitting.

Color: Black

Model: Full Size

SPECS:

-Length: 1 3/8″

-Material: Carbon Steel

-Weight: 3.5 oz

INCLUDES:

-Set screw

-Hex Key Wrench

-Threadlocker

-Light Weight Recoil Spring

-Set Screw Flat on Barrel Threads 

INSTALLATION:

The compensator threads directly onto the Beretta factory 1/2-28 threaded barrel.

SET SCREW FLAT:

The barrel requires a set screw flat on the bottom of the barrel threads.  This set screw flat provides a reference for the set screw in the compensator and prevents the set screw from damaging the barrel threads. The set screw flat does not damage the threads in any way.

A1 MODELS:

This compensator is designed around the 92 FS/Vertec slides.  It is not an exact profile match to any of the model A1 Beretta’s (92A1, M9A1, 96A1) or Brigadier slides.  The compensator will, however, function on all Beretta 92, M9, and 96 slides.

ADDITIONAL INFO:

This compensator must be used with the reduced power recoil spring provided with the compensator.