Mounting Hardware is Included

This Mount Fits:

• Browning BLR Short Action
• Browning BLR Takedown

In October 2019 the overall length of this mount was changed from 5.488" to 5.094" to accomodate takedown models.  If you purchase a mount from a third party seller there is a chance it may be older and not fit your takedown.

We have found that older model BLRs may use the long action rail despite the caliber. Please measure your hole spacing to confirm.

Rail Type: One Piece Picatinny

Machined from: Domestic 6061 T6 Extruded Aluminum

Finish: Matte Black Anodizing

Center Spread: 2.8"

Overall Length: 5.094"

Height: .4" (Top of Receiver to Top of Picatinny)

Weight: 2 oz.

Quick Disconnect Ring Compatible: No

Ambidextrous: Yes

Torque Specs: 20 in/lbs

Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included

We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

We recommend:

0 MOA - if shooting 0-500 yards

20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.