CARVER Custom 9MM 3 port compensator for your M&P 1.0 Pro/L 5.0" Model. These comps were designed to fit the contour of the slide and to appear as an extension of the slide. The compensators are made out of tough 6061-T6 aircraft aluminum and have Type 2 anodizing in two colors: Black and Silver.

Benefits of this compensator include:

• Large expansion chamber leading into 2 retaining ports
• Porting on the sides, allows more air to rush into the compensator, pushing more exhaust up, allowing more control of the muzzle
• Comp weight 1.1 oz
• Guiderod channel under compensator
• Controls muzzle flip and recoil up to 45% dependent upon type of ammunition used. The higher power factors will deliver more efficiency.
• Stylish and effective!!
• Excellent for IPSC Major

This comp is threaded for 1/2 x 28 tpi barrels. This comp was designed to fit the APEX threaded barrel for the M&P 5.0" slide. If you have any questions, please feel free to call or email.

Compensators will fit the following 1.0 Generation 9MM Smith & Wesson model:

• M&P Pro/L (5.0")

When using the CARVER Custom compensator system, you will need to use a lighter recoil spring to compromise the slide speed since the compensators are so efficient they are reducing the amount of energy normally utilized by the slide to recycle.

Recoil springs recommended if using factory ammunition or equivalent.

• Major loads will require heavier springs such as a 17-18lb.
• 13-15 lb spring for +P 9MM up to 150K PF
• 11-13 lb spring for factory 115-124 graiin ammo up to 130K PF