Designed specifically for reloading of Shell Shock Technologies  9mm Luger S3 / NAS3 9mm Luger cartridge casings.

S3 RELOAD™ carbide die set FITS 7/8-14″ presses. Die features a unique spring-loaded mechanism to push cases out of the die, instead of pulling cases by the rim/ejector groove.

The S3 Reload™ dies have been successfully tested with 5-station Dillon, Hornady, RCBS, and Lee presses. For these presses the S3 Reload flaring die can be mounted in the station prior to the powder drop.

For Dillon press models that feature an integrated flaring and powder-drop tool, the standard Dillon flaring tool (with its integrated powder drop) can be used instead of the S3 Reload™ flaring tool provided that 1) the S3 Reload™ sizing tool is used in the initial sizing station 2) the flaring die is well lubricated.

As long as the overall length of the cases after sizing and flaring (using either S3 Reload™ dies or the combination of S3 Reload™ sizing die + Dillon flaring die) is within SAMMI specifications, the cases are suitable to be loaded and fired.

New improved 9mm 38 ACP S3 RELOAD™ Powder Funnel for Dillon.
Will last longer, properly flare, and seat the bullet inside BRASS or NAS3 casing to prevent tipping over of the bullet during indexing of the shell plate.
Funnel designed to lower friction during flaring of Brass or NAS3 casings made by Shell Shock Technologies.
Made from wear-resistant hardened stainless steel.

LEE is a trademark of LEE Precision, Inc.

NAS3 is a trademark of Shell Shock Technologies, LLC (Shell Tech).